Car Ghost Immobiliser
Ghost Immobiliser The Ghost Immobiliser, a sophisticated system, prevents your vehicle from starting if there is no unique code input via existing buttons. The device is unnoticeable to thieves and runs quietly.
ghost immobiliser car can help to deter newer methods like hotwiring and relay thefts. It could also lower the cost of insurance.
No Radio Frequencies
A ghost immobiliser is different from a conventional one in that it does not transmit radio frequency, which makes it impossible for thieves to bypass the device using a cheap key cloning device. A ghost immobiliser prevents your car from starting even if the thief has cloned or taken your key.
Ghost immobilisers are also effective against so-called relay attacks. These involve amplifying the signal from your key fob in order to fool the system into allowing your vehicle to start. The Ghost will recognise this and refuse to start the vehicle until you enter the PIN code. This is a great method to combat tech-savvy car thieves who have easy-to-use and affordable tools to duplicate your vehicle.
The Ghost can also be fitted discreetly (without doing any damage to your vehicle) and will only work once the correct pin sequence is entered. This will only be known by the person who set it up, meaning that nobody can use your car without knowing your pin code. Some systems allow the owner to set up a valet or service mode, which permits the owner to let someone else use their vehicle without having to reveal their pin code. This protects the vehicle from thefts that could be triggered by opportunistic means.
As well as being very user-friendly and simple to deactivate and disarm, the Ghost can also be connected with a car tracker, making it possible to locate your vehicle. Some insurers will offer discounts on your car insurance if it has a Ghost installed which is fantastic news for the security of your car and its contents.
The Ghost immobiliser, though not Thatcham approved, is an aftermarket product that has been independently evaluated and found to function. If you're thinking of purchasing a used vehicle with the Ghost immobiliser fitted, then ask the seller if they're willing to transfer it to the new vehicle. This will make your new vehicle more secure than if the previous owner hadn't transferred it.
No Circuit Cuts
Even if your vehicle is stolen, thieves won't be able to start it. The thieves must be aware of the buttons used to unlock the vehicle, and they will not be able to accomplish this without knowing the sequences. This will discourage them them from attempting to steal your vehicle.
If you have an GPS tracking device installed, the Ghost can function as an anti theft device. It can send a signal to activate a siren to warn the tracker of an theft attempt. This feature can be activated at any time via your online dashboard.
When you link your Ghost to your CAN data network, it will identify the vehicle and its owner through the unique pin code programmed during installation. This enables the device to communicate with your vehicle's ECU and immobilise the engine. immobiliser ghost means that the engine will only be started when it is authorised by the owner of the vehicle or someone who has a valid PIN code.
Because the pin code is created from existing buttons that are easily accessible to the driver (such as cruise control and stereo mute) it is mathematically inaccessible to be guessed by potential thieves. Your technician will also provide you with an emergency Pin Code override card which is similar to scratch-off lottery tickets. It simply needs to be scratched off to reveal the code and the directions.
Your Ghost isn't detected using these methods, since it does not employ circuit breaks or radio frequencies. This means that it is unaffected by the modern methods used by organised gangs of thieves who specialise in codes-grabbing technology and RF scanning. It is also a lifetime product that can easily be removed from your vehicle after you sell it, meaning that you will not lose any of the protection you've invested in.
No Key Fobs
With rising vehicle theft in the UK, proactive measures are required to protect precious vehicles from thieves who are opportunistic. The Autowatch Ghost Immobiliser is an innovative device that provides a robust defense against key hacking, cloning, and attacks on signals relay. It is a discrete and highly effective car security system that is easy to install in a vast variety of vehicles.
The Ghost immobiliser isn't an ordinary system that relies on key fobs. It also does not use signals relays. Therefore, it is not affected by signal interception and is unable to be activated using stolen or damaged remotes. It is also tamper proof and does not have any external wiring, which makes it difficult to take off or disable.
It safeguards your pride and joy from key-long, hacking and key theft by preventing the engine from beginning until you input a unique PIN code. This is achieved by utilising buttons already within the vehicle, such as the ones on the steering wheel or door panels, as well as the central console to design a customised disarm sequence up to 20 presses (like entering a PIN in your smartphone).
It will only work if you enter the correct pin code. This makes it hard for thieves to steal your vehicle, and is simple to use. If you're worried about not remembering the pin code, the installer will provide you with an emergency override driver fob that allows you to use your car in the same way as you normally would.
The absence of key fobs and LED indicators also means that the Ghost immobiliser cannot be identified by devices for diagnosis or RF scanners commonly used by thieves to identify the presence of an electronic system. This stealth installation improves the effectiveness of the system and permits it to be put in a place that is difficult for thieves to access.
Ghost immobilisers can be an affordable and effective way to deter thefts and increase the value of your vehicle. Some insurance providers will also acknowledge them and offer reduced premiums.
No Damage
If your vehicle is equipped with a ghost immobiliser you can rest your mind in knowing that your vehicle is safe against hacking, cloning and key fob theft and other popular methods of theft. This is especially important if you've invested lots of time and money in customising your vehicle or own a high-value or rare model. A ghost immobiliser works silently and leaves no trace of the instillation process and does not require any new parts to be put in.
The system is activated by buttons on your steering wheel, center console or door panels and enables you to set up an encrypted pin code sequence that must be entered before the engine can be started. You can alter the sequence at anytime. This means that even if a person knows your pin number they will not be able to start your vehicle. It is also simple to deactivate the device in the service valet mode, so that your vehicle can be driven away for cleaning, servicing or an MOT without it being activated.
This means that even if the vehicle is stolen or cloned, the person who stole it will not be in a position to start your car and will be caught. The system will also notify you of any alteration to the wiring system in your vehicle for example, cutting or signal interception and will send the information to your smartphone which allows you to verify that the security of your vehicle is in place at all times.
But, there might come a time that you're looking to take off or disable the Ghost Immobiliser, perhaps for maintenance or for resale. In this scenario, you will need to follow a carefully-planned procedure to remove the device without damaging the wiring system in your vehicle. It is highly recommended that you wear protective gloves during this procedure, and also make use of a flashlight to illuminate the dark areas of your vehicle in which the immobiliser might be installed. It is also recommended to refer to any installation documents or user manuals you may have to determine the specific location of the device.
After the immobiliser has been removed from the wiring system, you can reconnect the car battery and test to ensure that it works as intended and that all electrical components are working in the way they were intended to. It is then time to insulate and join any wires that were cut using soldering or electrical tape where necessary. Make sure there are no exposed wires and that any dangling cables are secured with zip ties or other suitable method. To ensure that your vehicle won't be damaged through the removal process, schedule a professional vehicle checkup.